Amigurumi Cat Free Pattern

Designer : Lyudmila Orlova
Instagram: ludaorlova_toys

Hello everyone who loves amigurumi…
Today I shared the amigurumi cat crochet pattern for you. Below you will find a step-by-step tutorial of this pattern and you will complete it without any difficulty. Thanks to the creator for this cute pattern.

Amigurumi cats, amigurumi dolls, amigurumi dogs, amigurumi unicorns, amigurumi lambs, amigurumi dinosaurs, amigurumi foxes, amigurumi bears, amigurumi giraffes, amigurumi pigs, amigurumi birds, amigurumi bunny, amigurumi elephants, amigurumi hippos, amigurumi monkeys… All the amigurumi toy crochet patterns and ideas you are looking for are here. Have a great time…

Materials and tools
• Yarn – semi-cotton Gazzal Baby Cotton 50g/165m, color No. 3430 (gray), color #3438 (Navy Blue), Color #3431 (Jeans), Color #3432 (White), Color #3443 (Red poppy)
• Crochet hook 2 mm
• Filler – holofiber
• Beads for eyes with a diameter of 6mm

• Sewing machine (optional)
• Buttons – 2 pieces
• A piece of fabric measuring 27 * 9 cm (for a scarf)
• Stitching needle, scissors, pins, knitting marker
• A little black, white and pink thread for embroidering the muzzle

Abbreviations
MR- Magic ring
Ch- Chain
Sc- Single crochet
Inc- Increase
Dec- Decrease
Sl st- Slip stitch
Dc- Double crochet

(…) – the number in brackets means the number of loops in the row
(…)*X – repeat X times indicated in brackets

• The size of the finished toy when using the specified materials is about 20 cm.
• It is an amigurumi pattern for beginners with basic crochet skills.

CROCHET CUTE CAT JEREMY AMIGURUMI FREE PATTERN

Arms (Make 2)
Link two pieces. Stuff while crocheting. Stuff the lower part tightly, then fill it medium, do not fill the upper part.
Start in grey:
Rnd 1. 6 sc in MR
Rnd 2. (inc)*6 (12)
Rnd 3-6. 12 sc (4 rnds)
Change color to white.

Rnd 7-8. 12 sc
Change the thread to dark blue.
Rnd 9-10. 12 sc
Change color to white.
Rnd 11-12. 12 sc
Change the thread to dark blue.

Rnd 13-14. 12 sc
Change color to white.
Rnd 15-16. 12 sc
Change the thread to dark blue.
Rnd 17-18. 12 sc
Change color to white.

Rnd 19-20. 12 sc
Change the thread to dark blue.
Rnd 21-22. 12 sc
Change color to white.
Rnd 23. 12 sc
Crochet another 6sc, then fold the edges of the part together, crochet 6sc. Fasten the thread, cut.

Tail
Stuff while crocheting. Stuff the lower part tightly, then fill it medium, do not fill the upper part.
Crochet in gray:
Rnd 1. 6 sc in MR
Rnd 2. (inc)*6 (12)
Rnd 3-25. 12 sc (23 rnds)
Fold the edges of the part together, crochet 6sc. Fasten the thread, cut.

Legs and body
First tie the first leg. Legs and body tight stuff in the process of crocheting.
Start crochet in grey:
Rnd 1. 6 sc in MR
Rnd 2. (inc)*6 (12)
Rnd 3. (1sc,inc)*6 (18)
Rnd 4. 1sc, inc, (2sc,inc)*5, 1sc (24)

Rnd 5-7. 24 sc (3 rnds)
Rnd 8. 6sc, 6dec, 6sc (18)
Rnd 9. (4sc,dec)*3 (15)
Rnd 10-12. 15 sc (3 rnds)
Rnd 13. (4sc,inc)*3 (18)
Rnd 14-16. 18 sc (3 rnds)
Rnd 17. (5sc,inc)*3 (21)

Crochet another 7 sc, sl st. finish crocheting, fasten the thread and cut.
Crochet the second leg in the same way as the first, but after the 17th row, crochet another 18 sc. Do not cut the thread, but continue to crochet the body. (You may need a different number of stitches after 17 rows, then you need to adjust it yourself.)

Rnd 18. from the second leg, dial a chain of 6ch and attach to the first leg where finished crocheting (into the loop following sl st). Make sure your feet are looking directly.
Next, crochet 21sc on the first part, 6sc along a chain of turning chain stitch, 21sc on the second part, 6sc on the reverse side chains of turning chain stitch (54sc)

A marker must be placed at this location. (marker is on the front)

Rnd 19-26. 54 sc (8 rnds)
In the next row, you need to crochet a tail. Make sure the tail is in exactly in the middle.
Rnd 27. 22sc, 6sc, (tie a ponytail), 26 sc (54)
Rnd 28. (7sc,dec)*6 (48)
Next, you need to align the marker exactly on middle of the back. For this I needed crochet 22sc (you may need to crochet another number of loops), and in next loop change color to dark blue. Now here will be the beginning of the next row, set the marker.

Rnd 29-30. 48 sc
Change color to white.
Rnd 31. 48 sc
Rnd 32. (10sc,dec)*4 (44)
Change the thread to dark blue.
Rnd 33-34. 44 sc
Change color to white.

Rnd 35-36. 44 sc
Change the thread to dark blue.
Rnd 37-38. 44 sc
Change color to white.
Rnd 39. 44 sc
Rnd 40. (9sc,dec)*4 (40)

Change the thread to dark blue.
Rnd 41-42. 40 sc
Change color to white.
Rnd 43. (8sc,dec)*4 (36)

In the next row, you need to crochet handles. Make sure they are positioned symmetrically on the sides of the body.
Rnd 44. 9sc, 6sc, (tie a arm), 12sc, 6sc, (tie a arm), 3sc (36)
Change the thread to dark blue.
Rnd 45. (4sc,dec)*6 (30)
Rnd 46. 30 sc
Change thread to grey.
Rnd 47. (3sc,dec)*6 (24)
Rnd 48-49. 24 sc

The body is ready. Further, without tearing off the thread, we continue to crochet the head. We stuff very tightly.

Head
Rnd 50. inc in each loop (48sc)
Rnd 51. (7sc,inc)*6 (54)
Rnd 52. 4sc, inc, (8sc,inc)*5, 4sc (60)
Rnd 53-64. 60 sc (12 rnds)
Rnd 65. 4sc, dec, (8sc,dec)*5, 4sc (54)
Rnd 66. (7sc,dec)*6 (48)

Rnd 67. 3sc, dec, (6sc,dec)*5, 3sc (42)
Rnd 68. (5sc,dec)*6 (36)
Rnd 69. 2sc, dec, (4sc,dec)*5, 2sc (30)
Rnd 70. (3sc,dec)*6 (24)
Rnd 71. 1sc, dec, (2sc,dec)*5, 1sc (18)
Rnd 72. (1sc,dec)*6 (12)

Fasten and cut the thread, leaving a long tip with which to pull remaining hole. Hide the tail of the thread inside the head.

Ears (Make 2)
Tie two pieces in gray.
Rnd 1. 6 sc in MR
Rnd 2. (1sc,inc)*3 (9)
Rnd 3. (2sc,inc)*3 (12)
Rnd 4. (5sc,inc)*2 (14)
Rnd 5. (6sc,inc)*2 (16)
Rnd 6. (7sc,inc)*2 (18)
Rnd 7. (8sc,inc)*2 (20)

Fasten the thread, cut off, leaving long end for sewing.

Muzzle
Crochet in white.
Rnd 1. 6 sc in MR
Rnd 2. Inc in each loop (12)
Rnd 3. (1sc,inc)*6 (18)
Rnd 4. 1sc, inc, (2sc,inc)*5, 1sc (24)
Rnd 5. (3sc,inc)*6 (30)
Rnd 6. 30 sc
Fasten the thread, cut off, leaving a long end for sewing.

Design and assembly
First you need to sew on the muzzle.
Determine the location of the muzzle approximately between 51 and 61 nearby heads, pin with pins (make sure that it is located in the center). Sew, in the process of sewing, put the filler inside.
Sew eyes on both sides of the muzzle. To do this, mark with pins the location of the peephole, which are between 59 and 60 next to the head, the distance between the points is 10-11sc. When sewing a small tightening. With a white thread, make stitches around the eye to make the look more “alive”. Black thread can be added or rather eyelid.

On the muzzle with pins, mark the location of the spout, embroider with pink thread. Embroider the mouth, eyebrows and mustache with black thread.
With pins, mark the location of the ears, sew approximately between 61 and 70 next (make sure that the ears are sewn symmetrically).

Pants
Knitting panties starts from the top.
With the color “jeans” dial a chain from 54 ch and with the help of sl st close it in a circle. Rnd 1. 2 ch turn, 54 dc, sl st
Rnd 2. (8sc,inc)*6 (60)
Rnd 3-7. 60 sc (5 rnds)

In the next row, you need to do tail hole.
Rnd 8. dial a chain of 6 in ch, 6 sc skip previous row, continue knitting in the next loop, 54sc (60sc)
Rnd 9-18. 60 sc (10 rnds)

Further knitting is divided as follows:
28 sc (trouser leg), 2 sc, 28 sc (trouser leg), 2 sc.
You need to position the legs so that the hole for the tail was exactly in the middle.
To do this, I needed to knit 4 sc (you may have a different amount loops), then count 28sc and connect to a circle. Continue knitting already on 28 loops.
Rnd 19-29. 28 sc (11 rnds)

Finish knitting sl st, fasten and cut the thread, hide the end of the thread.
Next, return to the beginning of knitting the legs, count 2 sc from the first (this will be the distance between them), tie the thread, leaving a free tail of about 20 cm.
Count 28 sc, with the help of sl-st connect in a circle and knit again 11 rows of 28 sc.
Next, finish knitting sl st, fasten and cut the thread, hide the tip of the thread.
With the left end of the thread, sew the distance between the legs.

Pocket
Knit in turning rows, each row start with 1ch turn.
Dial a chain of 10ch + 1ch turning.
Start the first row from the 2nd loop from the hook.
Rnd 1-8. 10 sc (8 rnds)
Tie the sides of the pocket sc, fasten the thread and cut off, leaving a long tip for sewing.

Pants shoulder belt
Knit 2 pieces of the desired length. I needed to dial 28ch, maybe you will have a different amount (depending on the density of knitting).
Knit in turning rows. When tying the initial chain, leave a free tail of about 20cm.
Dial a chain of 28ch + 1ch turning.
Start the first row from the 2nd loop from the hook.

Rnd 1. 28 sc, 1 ch turn
Rnd 2. 28 sc
Fasten and cut the thread, leaving end for sewing.
Sew the straps to the pants, in front sew on decorative buttons.
Sew on a pocket.

Beret
Crochet in white:
Rnd 1. 6 sc in MR
Rnd 2. (inc)*6 (12sc)
Rnd 3. (1sc, inc)*6 (18sc)
Rnd 4. (2sc, inc)*6 (24sc)
Rnd 5. (3sc, inc)*6 (30sc)
Rnd 6. (4sc, inc)*6 (36sc)
Rnd 7. (5sc, inc)*6 (42sc)
Rnd 8. (6sc, inc)*6 (48sc)
Rnd 9. (7sc, inc)*6 (54sc)

Rnd 10. (8sc, inc)*6 (60sc)
Rnd 11. (9sc, inc)*6 (66sc)
Rnd 12. (10sc, inc)*6 (72sc)
Rnd 13. (11sc, inc)*6 (78sc)
Rnd 14. (12sc, inc)*6 (84sc)
Rnd 15-17. 84sc (3 rnds)
Rnd 18. (12sc, dec)*6 (78sc)
Rnd 19. (11sc, dec)*6 (72sc)
Rnd 20. (10sc, dec)*6 (66sc)
Rnd 21. 66sc

Finish crocheting sl st, fasten the thread and cut off, hide the end of the thread.

Pompon
Crochet in red, fill in the process crocheting.
Rnd 1. 6 sc in MR
Rnd 2. (inc)*6 (12)
Rnd 3. (1sc,inc)*6 (18)
Rnd 4. (2sc,inc)*6 (24)
Rnd 5-8. 24 sc (4 rnds)
Rnd 9. (2sc,dec)*6 (18)
Rnd 10. (1sc,dec)*6 (12)

Fasten the thread, cut off, leaving a long end for sewing.
Sew the pompom to the top of the beret.

Scarf
On paper, make a pattern according to the dimensions indicated in the photo.
Transfer the pattern to the fabric, leave allowances of 0.7-1 cm for hem, cut out.
Finish the edges, fold and stitch.

Congratulations!
Your crochet kitty Jeremy is ready!

More amigurumi cat ideas: